Practical UK cleaning guides, researched, checked and written for British homes
Home Care

How to Clean Shutter Blinds: Wood, Faux Wood & Vinyl

Clean shutter blinds by dusting weekly and using only a barely damp cloth on real wood. Covers faux wood, vinyl, grease, hinges, and true blinds.

GW
Grace Whitfield
Researched for UK homes
20 min read
Person cleaning white wooden shutter blinds with microfibre cloth and cleaning supplies in bright modern living room

The sun comes round to the front window in the late afternoon, the louvres catch the light, and there it is: a fine grey fur along the top edge of every slat. You run a finger down one and it leaves a clean stripe. Behind it, the next slat looks the same. There are 24 of them on this window alone, and three more windows to go.

Shutters collect dust in a way curtains do not, because every louvre is a small flat shelf. In a kitchen they pick up a film of grease on top, and in a bathroom they pick up steam and limescale spots. The good news is that the job is more about method than muscle. Dust on the right schedule, use almost no water on real wood, and know what your shutters are actually made of, and most of the work disappears.

This guide follows one real clean from the first dust to the last wipe. It covers painted wood, faux wood and vinyl, deals with grease and marks, looks after the hinges and tilt rod, and includes a section for anyone whose ‘shutter blinds’ are really blinds.

Disclosure: Cleaners Guide is a participant in the Amazon Associates programme, so if you buy through links on this page we may earn a small commission at no extra cost to you. It never changes our recommendations, we suggest products because they work and we point out cheaper options where they do the same job. Prices and availability change, so always check the current price before buying.

Shutter Blinds being cleaned

Before the cloth comes out: what are your shutters made of?

This one question decides how much water you can use. Plantation-style shutters are made from a few materials, and they behave very differently under a damp cloth.

Shutter materialHow to tellHow it likes to be cleaned
Painted solid hardwoodReal grain under the paint, cool and slightly heavy to hold, a small chip shows woodDry dust, then a barely damp cloth. Wipe dry at once
Painted MDF or engineered woodUniform, smooth, a chip shows a brown fibrous coreTreat like wood. The core swells if water gets in through chips or edges
Faux wood, vinyl or ABSWarm to the touch, light, a chip shows white or coloured plastic all the way throughDamp microfibre and mild soapy water, then dry to avoid streaks
AluminiumCold, thin and very light, often seen in older or commercial installsWet cleaning is fine, but dry to prevent water spots

If the supplier left care instructions, use them before anything on this page. If you cannot tell, treat the shutters as painted wood. It is the cautious choice, because a plastic shutter will not mind the gentle method, while a wood one will mind a wet cloth. Wood and MDF are also the reason to avoid steam cleaners and soaking: moisture works its way under the paint at the edges and joints and causes swelling, bubbling and warping.

Shutter styles and what they mean for cleaning

  • Full-height shutters have long louvres, so they need a longer-reaching duster or a step stool. Do the top section first and use a stable step, not a chair.
  • Tier-on-tier shutters have separate upper and lower panels, which makes the middle rail a dust shelf. Wipe it each time.
  • CafĂ©-style shutters cover only the lower half of the window, so they are easy to reach but pick up splashes in kitchens.
  • Solid-panel shutters have no louvres to dust, so a wipe with a damp cloth along the panel and its frame is enough.
  • Bi-fold and track shutters have hinges and tracks at the top and bottom that collect grit, so check them as part of every deep clean.

What to gather

You do not need a trolley of products. Four items cover most of it: a soft duster or microfibre cloth, a vacuum with a soft brush attachment, a bowl of warm water with a few drops of washing-up liquid, and a clean dry towel. A soft toothbrush or small paintbrush deals with corners, and a small spray bottle gives control over how wet a cloth gets. Spread an old towel or dust sheet under the window to catch drips and fallen dust, and keep it separate from the cloth you use to dry. If you want a reminder of why we prefer microfibre for this kind of job, see our comparison of microfibre and cotton cloths.

Clean white plantation shutters
Dust both sides of each slat, and keep water off painted wood.

The weekly dust, done properly

Most of the benefit comes from a light dust, done often. It takes a few minutes per window and stops dust from turning to a sticky layer that needs a wet clean.

  1. Close the louvres so the slats overlap and form a flat face. Dust from the top down, with a soft cloth or a duster, so what falls lands on the part you have not done yet.
  2. Tilt the louvres fully open in the other direction, and wipe the other side of each slat. Many people only clean the side that faces the room.
  3. Do the frame, the top rail and the tilt rod, which collects the most fingerprints.
  4. Finish with the vacuum on a low setting and the soft brush, run along the slats and the base, to catch what the cloth has displaced.
  5. Wipe fresh marks straight away with a slightly damp cloth. A fingerprint wipes away in a second, and set-in grime does not.

Rinse or shake out the cloth often, or swap to a clean one, so you do not rub dust back over the slats. Keep the vacuum on low power on painted shutters to avoid scratching, and do not press the nozzle onto the finish.

Tools compared: what is worth having

You can do the dusting with a clean sock or a cloth. If you have a lot of windows, or you find bending to every slat tiring, a few cheap tools help. The table compares them by who they suit.

ToolBest forLook forKeep in mind
Blind dusterWeekly dusting of many slats, both sides at onceSoft microfibre or lambswool fingers that grip the slat, and a handle that reaches the topCheck the width fits your louvres. Shake it out between windows
Slat brushWider louvres and quick passes in rooms with petsSoft bristles that will not scratch paint and a shape that fits between slatsTest on a hidden spot, as stiff bristles can mark a painted finish
Microfibre clothsDamp-wiping faux wood and vinyl without streaks, and dryingA pack, so you can keep one for dusting and one for wet workWash without fabric softener
Handheld vacuumEdges, the base rail and hinge channels where dust settlesA soft brush head and adjustable suctionNever press the nozzle against the paint. Keep suction low
Compressed air dusterBlowing dust from tight hinges and gapsA long thin nozzleDo it outdoors or with a window open, and keep it away from your face
Which tool for which job.

A cheap trick for a window with a lot of slats: slide a cloth over a long wooden spoon or a pair of kitchen tongs with the cloth held on by an elastic band, then pull it along each slat. It does the same thing as a purpose-made blind duster, and costs nothing.

The deep clean, step by step

Do this every few months, or sooner in a kitchen or bathroom. Start with the weekly dust, so you are not turning loose dust into mud with a damp cloth.

  1. Protect the area. Lay a towel on the sill and floor, and move anything delicate out of the way. Open the window if you can for ventilation.
  2. Dust and vacuum first, as above, including the frame and hinges.
  3. Mix a mild solution: a couple of drops of washing-up liquid in a bowl of warm water. Mild soapy water is the usual advice for painted and plastic shutters, but check any care instructions that came with yours.
  4. Dampen a soft cloth and wring it until it is barely wet. It should feel only slightly damp. Never spray liquid directly onto wooden or MDF shutters, as it runs into joints.
  5. Wipe one louvre at a time, from top to bottom, following the length of the slat and the grain. Do both sides by tilting the louvres, supporting each slat with your other hand so you do not force it.
  6. Dry straight away with a second clean cloth or towel, so that no water sits at the edges, in the corners or in the hinge areas.
  7. Do the frame, rails and tilt rod, using a lightly damp cloth, then dry them as well.
  8. Leave the louvres open and the window ajar for an hour or so, so that any trace of moisture can evaporate.

Faux wood, vinyl and aluminium can take a little more

Plastic and metal shutters tolerate more water. You can spray a mild soapy solution onto the cloth (or lightly onto the slats), leave it for around 30 seconds to loosen grease, and wipe each slat with a damp microfibre cloth. A soft brush deals with ridges and corners. Rinse the cloth in clean water and go over the slat again to remove soap, or soap residue will attract dust. Dry with a clean cloth to stop streaks and water spots, which matter most on dark or glossy finishes. If an aluminium or vinyl set is very grubby, such as in a kitchen, taking louvres out and washing them is an option only where the maker allows it.

Use fewer products, not more

There are blind-and-shutter sprays with anti-static ingredients, which can help dust slide off in dusty rooms, but they are optional. Avoid solvents, bleach, abrasive powders and furniture polish with silicone on painted shutters, because they can dull, mark or soften the finish. For an overview of what sits in each product type, see our cleaning products section.

What to keep away from your shutters

  • Soaking and steam. Wood and MDF swell, and paint lifts at the edges.
  • Bleach and solvent cleaners. They dull and soften painted finishes and discolour plastics.
  • Abrasive pads and scouring powders. They scratch paint and leave marks that hold dirt.
  • Silicone furniture polish and sprays. They leave a slippery film that attracts dust and can make later touch-up paint stick badly.
  • Heat guns, hair dryers and radiators for drying. They warp slats and can crack paint.
  • Pulling on louvres to move them. Use the tilt rod, or the edge of the slat near the hinge, so you do not strain the pins.

Dust, pets and allergies

If someone in the house has dust or pollen allergies, dusting with a dry cloth can throw particles into the air, so use a damp microfibre cloth or the vacuum brush and open a window as you work. Pet hair clings to slats because of static, and a lightly damp cloth or a rubber glove drawn along the slat lifts it away. A quick damp wipe also helps in spring, when pollen settles on window treatments.

The glass behind the shutters

While the louvres are open, the glass and sill behind them are exposed. Wipe the sill, clean the glass with your usual window method, and clear condensation moisture from the frame. Dirty glass makes clean shutters look worse, and a damp sill is a common source of mould on painted wood. Keep a small towel on the sill in winter if condensation forms.

Grease, water marks, mould and other stubborn marks

Kitchen grease

Shutters near a hob catch a film of grease that dust sticks to. Use warm water with a little washing-up liquid on a barely damp cloth, working from the edges of the mark toward the centre so you do not spread it. For dried-on spots on plastic shutters, leave a paste of bicarbonate of soda and water on for 15 to 20 minutes, then wipe it off gently. On painted wood, use only the soapy cloth and test any stronger product on a hidden spot first. Our guide to removing grease from kitchen cabinets uses the same principles and works for lacquered or painted surfaces. A good extractor helps too, so keep the extractor fan filters clean to cut down the grease reaching the shutters.

Water marks and limescale

Bathrooms and kitchens give you cloudy white spots where steam and splashes have dried. On plastic or aluminium shutters, a spray of white vinegar and water on a cloth, left for a few minutes and wiped off, usually removes them. Do not use vinegar on painted wood or MDF other than a very diluted wipe tested somewhere hidden, and never leave it sitting. Lemon juice does a similar job on plastic and should also be wiped off. Dry afterwards. If a spot is on bare or varnished wood and has gone dark, that is moisture in the wood itself and cleaning may not shift it. Leave it and consider a repair.

Mould and mildew

Mould shows as black, grey or green specks, usually in bathrooms, in shaded corners or where shutters sit against cold glass. Wipe it off with a cloth wrung out in warm soapy water, or a dilute vinegar solution on plastic, and dry thoroughly. Wear gloves and ventilate, and do not scrub hard. Mould returns where damp air lingers, so open the window after showers and use the extractor. If mould is widespread, comes back quickly, or is growing on the wall around the window, there is a damp problem to solve, not a cleaning one.

Fading, yellowing and chipped paint

Sun can bleach and yellow some finishes over time, and these changes are usually permanent. Cleaning will not reverse them, so the answer is prevention: a UV film on the glass or closing the louvres against the strongest sun helps. Chips in painted wood or MDF should be touched up with paint from the supplier, because exposed fibres absorb water and swell. Do not try to bleach or dye shutters.

MarkLikely onTry
Dust filmAll typesDust and vacuum on a schedule
GreaseKitchens, all typesSoapy cloth. Bicarb paste on plastic only
White water spotsBathrooms, kitchensDilute vinegar on plastic or aluminium. Dry thoroughly
Black specksBathrooms, damp roomsSoapy cloth, ventilation, dry fully
Yellowing or fadingSouth-facing windowsNot reversible. Add UV film or shade
Bubbled or swollen paintWood and MDF after waterLet dry. A professional repair may be needed

Hinges, tilt rods, frames and tracks

Shutters live or die by their moving parts, and a bit of attention keeps them swinging smoothly.

Tilt rod and louvre pivots

The tilt rod collects finger oils and dust. Wipe it with a damp microfibre cloth, then dry it. Use a soft brush or cotton bud around the pivot points where each louvre meets the frame, because dirt there is what makes shutters stiff or noisy. Avoid harsh chemicals that can degrade plastic parts or strip the finish from metal.

Hinges and frames

Wipe hinges and the frame with a lightly damp cloth, and check screws are tight. A stiff or squeaky hinge can take a tiny amount of light machine oil or silicone lubricant on a cotton bud, applied only to the metal, then wiped. Too much oil attracts dust and can stain paint, so use as little as possible. If the shutters are bi-fold or sliding on tracks, vacuum the track with a crevice tool and wipe it clean. Our window tracks guide shows how to deal with built-up grit.

Magnets, catches and the sill

Magnetic catches and latches pick up dust, which weakens the hold. Wipe them and check they close fully. The window sill below collects whatever falls, so wipe it each time you dust. If you have fixed furniture such as a window seat or radiator cover near the shutters, move it out when you clean, so dust does not drop onto it.

Brackets and cords

Fixed shutters have no cords. If your window treatment does have cords or chains, which is the case for most blinds, wipe them with a slightly damp cloth, never soak them, and replace any that are frayed. Keep cords and chains out of the reach of babies and young children, since looped cords are a strangulation risk, and use the safety devices that came with the product.

Doing a whole house without losing a weekend

Work room by room, not slat by slat across the house. Take the cloth, vacuum and a bowl of soapy water, dust all the shutters in a room, vacuum the sills and floor beneath, and only then damp-wipe. Start with the dirtiest rooms (kitchen, bathroom) while your cloths are fresh, and leave bedrooms for last. Swap to a clean cloth for each room, so you do not carry grease about. Doing one room a week through spring is far easier than a single marathon, and the shutters stay presentable the rest of the time.

If it did not work

Sometimes the wipe leaves a smear, a mark will not shift, or the shutters feel different afterwards. Here is what to do.

  • Streaks on faux wood or vinyl. Too much soap. Wipe again with a cloth wrung out in plain water, then buff dry with a clean microfibre cloth.
  • A mark that will not shift on painted wood. Stop scrubbing, as you are about to remove paint. Try a slightly stronger but still mild soapy cloth, give it time, and if the mark remains accept it or touch up the paint.
  • A sticky finish. Usually leftover polish, soap or grease. Wipe with a cloth dampened in clean water, dry well, and do not apply polish again.
  • A swollen, bubbled or warped slat. Water got in. Let the shutter dry fully in a ventilated space. If the damage stays, the slat or panel may need repair or replacement from the supplier or installer.
  • Stiff or noisy louvres. Clean the pivots and tilt rod, then apply a tiny amount of lubricant. If a louvre is bent or the pins are loose, ask the installer.
  • Everything is greasy or heavily stained. A specialist shutter or soft-furnishings cleaner has the equipment to handle it, and expensive wood shutters are worth protecting. Ask what they use and check it suits your material. Fabric blinds in a similar state can be a case for professional cleaning, too.

If you actually have blinds, not shutters

People often call any slatted window cover a shutter blind. If yours are blinds on a cord or wand, the dust-and-wipe routine above still works, but some materials need different care. We have separate guides for cleaning blinds, Venetian blinds and vertical blinds. The key points are:

TypeBest methodCaution
Aluminium or vinyl VenetianDust, then wipe each slat with a damp microfibre cloth and mild soapy water, or remove and soak in a bathDry thoroughly to prevent spots and corrosion. Do not bend the slats
Fabric (pleated, roller, Roman)Vacuum with a brush attachment on low, and blot stains with cold water and a mild detergentTest colourfastness. Blot, do not rub, and air dry
VerticalClose, vacuum each slat, wipe individually, and remove for washing if the slat type allows itPhotograph the order before removing slats
Wooden VenetianDust, barely damp wipe, dry at onceDo not soak. Water warps wood

Removing blinds for a soak

A heavily soiled aluminium or vinyl blind can be taken down and washed in the bath. Extend it fully so the slats are flat, release it from the brackets while supporting the weight, and photograph how it was mounted. Fill the bath with warm water, not hotter than about 40 degrees Celsius, add washing-up liquid, and soak for 15 to 30 minutes, longer for kitchen grease. Agitate gently, scrub stubborn areas with a soft brush, and rinse with lukewarm water. Do not wring or twist the blind. Hang it in a ventilated place out of direct sun and heat, and allow it to dry thoroughly before refitting. Drying can take many hours, so be patient. Wipe the brackets, check they are tight, rehang, and test raising, lowering and tilting. Machine-washing is generally a bad idea, as it damages slats, cords and mechanisms, so check the maker’s guidance, and see our page on whether vertical blinds can go in the washing machine for the exceptions.

Fabric, mould and discolouration

Fabric blinds should be vacuumed on a low setting first. For mould, vacuum loose spores, then dab with one part white vinegar to three parts water, or a suitable fabric mould treatment, test somewhere hidden, and dry completely. Hydrogen peroxide has a bleaching effect and can alter dyes, so test it first. Fading from sunlight is usually permanent, and a UV window film or closing the blinds in the strongest light is the only real remedy. Do not dry blinds near a radiator or in strong sun, which can warp slats and shrink fabric.

A routine that keeps them clean

Shutter or blind typeLight cleanDeeper cleanNotes
Wood or MDF shuttersWeekly dustEvery few months, barely dampAvoid excess moisture
Faux wood or vinyl shuttersWeekly or fortnightly wipeEvery couple of monthsMild soap only, dry fully
Aluminium blindsWeekly dustMonthly or as neededWatch for corrosion signs
Fabric blindsWeekly vacuumTwice a year, or as neededBlot stains, do not rub

Kitchens need weekly attention because grease builds faster, and bathrooms benefit from a fortnightly wipe plus ventilation to stop moisture marks. Opening and closing the louvres regularly stops dust settling in one position. Open windows after cooking and showering, run the extractor, and keep humidity moderate, since damp air is what feeds mould. A quick spring clean when the windows have been shut all winter pays off, because pollen and dust accumulate then, and a quick autumn check of hinges and tilt rods before the heating comes on is worthwhile. Good ventilation helps reduce dust and damp in a room, though nothing replaces regular dusting.

If you are cleaning the room as a whole, our guide to deep cleaning a bathroom follows the same top-to-bottom order, and this is one of the first things to do, since dust falls. Return to the Cleaners Guide home page for more room-by-room guides.

How often should I clean shutters?

Dust them weekly with a microfibre cloth or duster, and do a damp clean every few months. Kitchens and bathrooms need more frequent attention because of grease and moisture, while a spare room can go longer. If you can write your name in the dust, it is time.

Can I use water on wooden shutters?

Only a very little. Use a cloth wrung out until barely damp, wipe along the grain, and dry immediately. Standing water at edges and joints makes wood and MDF swell and the paint bubble. Never spray directly, soak, or use a steam cleaner on wood shutters.

What is the best way to dry shutters and blinds after cleaning?

Dry shutters straight away with a clean towel and leave the louvres open with the window ajar. Blinds that have been soaked should hang or lie flat in a ventilated spot out of sun and away from radiators, and must be completely dry before being rehung, because trapped damp encourages mould and corrodes mechanisms.

GW

Grace Whitfield

UK cleaning guides · researched & checked

Flooring, Furniture and Soft Furnishings Writer. Grace covers the surfaces and fabrics that make up the living areas: carpets, rugs, hard floors, sofas, mattresses, curtains and blinds. She explains how to identify the material first, because the right method for leather, microfibre, laminate or wool can be the wrong one for the next. Her guides lean on manufacturer care codes and flooring-industry guidance.

Leave a comment

Your email address will not be published. Required fields are marked *

Related guides